Filter
Top Products
51
Resuming the Standard Conditions
Chapter 3 Basic Adjustments and Settings
3-10 Resuming the
Standard Conditions
The <OPERATOR FILE> page of the USER
(OPERATION) menu permits you to return the operation
items (those contained on pages U02 to U14 of the factory-
preset USER menu) you changed to the factory-set
statuses.
<OPERATOR FILE> page
Position the pointer to PRESET and push on the MENU
SEL/ENTER dial. The operation items return to the
statuses stored in the operator file.
For details on the operator file, see “Chapter 5 Storage
and Retrieval of User Setting Data”.
3-11 Selecting the
Gamma
You can use User gamma you create in addition to the
built-in Standard gamma and Hyper gamma.
Use the <GAMMA> page of the USER (PAINT) menu for
gamma operations.
<GAMMA> page
Gamma selection is also possible on the gamma-table
selection page of the subdisplay.
3-11-1 Using the Standard Gamma
Standard Gamma is for video and intended to be used
mainly for creating broadcast contents. It is used in
combination with the Knee function that adjusts the
dynamic range of high-luminance areas.
When STANDARD is selected on the first line of TABLE
of the <GAMMA> page, you can select from among the
following standard gamma curves:
It is recommended to use the No. 5 (ITU-R709) curve in
normal use.
As ITU-R709 provides 4.5-times gain around the black,
select the No. 6 (×5) curve when you need higher contrast
around the black.
<OPERATOR FILE> U16
READ (MS CAM)
WRITE (CAM MS )
B
PRESET
FILE ID:
CAM CODE
DATE
t
t
Gamma table No. Gamma curve
1 equivalent to SD ENG camcorder
2 equivalent to 4.5-times gain
3 equivalent to 3.5-times gain
4 equivalent to SMPTE-240M
5 equivalent to ITU-R709
6 equivalent to 5.0-times gain
<GAMMA> U18
TABLE :
B
USER
: 1 S-LOG A
TEST : OFF