Filter
Top Products
45
Viewing and Setting the Viewfinder Displays
Chapter 3 Basic Adjustments and Settings
a Format indication
The current video format is displayed.
For details on the formats, see “3-14 Detailed Setting of
the Video Format” (page 54).
b Assignable switch indication
The functions assigned to the assignable buttons and
switch are indicated.
For functions that can be assigned, see “3-2-10 Allocation
of Functions to the Assignable Buttons and Switch” (page
35).
3-6-4 Setting the Marker Indications
The various markers, such as the center marker and safety
zone marker, can be displayed on the viewfinder and
monitor screens.
Example: Center marker (entire cross)
Example: Safety zone marker (90%)
The <CHAR/MARK MIX> page and <MARKER
SETTING> page of the USER (OPERATION) menu allow
you to switch the display of the markers on or off and to set
the display conditions of the markers.
Activating/deactivating all the marker
indications for each output
The <CHAR/MARK MIX> page permits you to activate
and deactivate the marker indications for each output.
<CHAR/MARK MIX> page
The MARKER indications are activated for all the outputs
at the factory.
Specifying the markers to be displayed
For the outputs for the total marker indication is activated
on the <CHAR/MARK MIX> page, select and adjust the
marker(s) to be displayed on the next <MARKER
SETTING> page.
<MARKER SETTING> page
All the markers have been set to OFF at the factory.
FUNCTION
FORMAT: 23.98PsF 4:4:4
(24)FPS
AS1:OFF
AS2:OFF
AS3:OFF
AS4:OFF
1
2
Item Setting
VF1 Turn all the markers on or off on the
viewfinder connected to the VF1 connector.
VF2 Turn all the markers on or off on the
viewfinder connected to the VF2 connector.
MONITOR Turn all the markers on or off on the monitors
connected via the MONITOR OUT
connectors.
VBS Turn all the markers on or off on the monitors
connected via the TEST OUT and REMOTE
connectors.
Item Setting
CENTER Set to ON to display the center marker and
select the type of the center marker.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY Set to ON to display the safety zone marker
and specify the range (80%, 90%, 92.5%, or
95%).
EFFECTIVE Set to ON to display the effective pixel area.
<CHAR/MARK MIX> U09
VF1 VF2 MON1 VBS
CHAR : ON ON ON ON
MARKER :
B
ON ON ON ON
CURSOR : OFF OFF OFF
ZEBRA : OFF OFF OFF OFF
VF GATE MARKER: OFF
<MARKER SETTING> U03
CENTER :
B
OFF 1
SAFETY : OFF 90.0%
EFFECTIVE : OFF
ASPECT : OFF 4:3
VARIABLE : --
SAFETY : OFF 90.0%
MASK : OFF 12
CURSOR : BOX
POSI H/V : 0 0
SIZE W/H : 960 540