Filter
Top Products
19
Mounting the SRW-1 Recorder
Chapter 2 Installation and Preparations
2-2 Mounting the SRW-1
Recorder
In the same manner as the interface box, the SRW-1 HD
Portable Digital Recorder can be mounted on the top or
rear of the camera head.
For handling of the SRW-1 Recorder, refer to the Operation
Manual of the recorder.
• The firmware of the SRW-1 may be required to be
updated for use with the camera.
For details, consult your Sony representative.
• When mounting the recorder, fix the camera head on a
tripod in advance to keep the camera head stable.
For tripod mounting, see “2-5 Mounting the Camera to
a Tripod” (page 22).
• When the camera is to be used with the recorder
mounted, make sure that the camera is securely fixed and
stable so that it will not topple over or fall.
Mounting to the top
Mounting to the rear
When connecting the SRW-1 recorder
using cables
Attach the SRPC-1 HD Video Processor to the recorder to
permit cable connections to the interface box mounted on
the camera.
Use two coaxial cables for connections. The cable length
can be extended up to 100 m when 5C-FB cables are used.
The camera and recorder must be controlled independently
when connected via cables.
Notes
SRW-1
P
A
G
E
S
E
T
1
2
3
P
R
O
OFF
O
N
R
E
M
O
T
E
O
C
K
VF MENU/DISPLAYCANCEL/STA
TUS
1
3
2
SRW-1
HD SDI AHD SDI B
HD SDI IN A
HD SDI IN B
SRPC-1
SRW-1
Coaxial cables