Filter
Top Products
70
Menu List
Chapter 4 Menu Configuration and Detailed Settings
<DETAIL 2>
Adjusting the
emphasis of the
contours in video
P09
[ - - ]
H/V RATIO 0 –99 to +99 To specify the vertical factor of
the contour emphasis
(Absolute values are
displayed in ABS mode.)
FREQ 0 –99 to +99 To adjust the video frequency
components to be
emphasized (Absolute values
are displayed in ABS mode.)
MIX RATIO 0 –99 to +99 Absolute value is displayed in
ABS mode.
KNEE APT 0 –99 to +99 For contour emphasis in high-
luminance areas compressed
by the KNEE function
(Absolute values are
displayed in ABS mode.)
OFF ON, OFF
ABS Highlighted: ABS (Absolute)
mode
<SKIN DETAIL>
Emphasizing the
contours of the
specific color
components
P10
[ - - ]
SKIN DTL OFF ON, OFF Fixed to OFF in Cine mode
SKIN GATE OFF OFF, 1, 2, 3 1, 2, 3: Skin gate can be set to
ON for the specified
channel only.
With the ON setting, a zebra
pattern is displayed for the
color component affected by
the DETAIL function.
ABS Highlighted: ABS (Absolute)
mode
CH SW
[1] [2] [3]
(ON) OFF OFF ON, OFF
The skin tone detail function
can be independently set for
each channel (channel 1 is
always ON).
HUE: For automatic detection
of the target color
Absolute values are indicated
for LEVEL only in ABS mode.
HUE
EXEC EXEC EXEC
Execute by ENTER.
PHASE 0 0 0 0 to 359
WIDTH 29 29 29 0 to 90
SAT –89 –89 –89 –99 to +99
LEVEL 0 0 0 –99 to +99
PAINT menu
Page title &
purpose
No. Item Default Settings Remarks