Filter
Top Products
41
Setting the Camera Outputs
Chapter 3 Basic Adjustments and Settings
To compare the playback picture and
camera image
The playback picture and camera image can be displayed
on the same screen when the playback-signal output mode
is set to ON or AUTO for the item PB on the <PB/MONI
GAMMA> page and if PB MIX is set to ON.
PB MIX
The playback-signal mix mode can be independently set to
ON or OFF for each VF, MONI, or VBS signal. When set
to ON, the playback picture and camera image are mixed.
How this is to be displayed can be set on the <PB MIX
SETTING> page of the USER (OPERATION) menu.
<PB MIX SETTING> page
MIX TYPE
How the picture is to be displayed can be selected.
MIX
When MIX TYPE is set to MIX, how to mix the pictures
can be selected.
WIPE
When MIX TYPE is set to WIPE, how pictures are to be
wiped can be selected.
To display the gamma mark
GAMMA MARK SETTING
When monitor gamma (ITU-R709) is applied to the SDI
output at the MONITOR OUT connectors and the
viewfinder images, you can set the camera to display the
gamma mark (709 ) to indicate that gamma that is
different from that used for recording is applied. (The mark
is not recorded with the docked recorder.)
Select GAMMA MARK SETTING on the <PB/MONI
GAMMA> page to jump to the subpage for setting the
gamma mark.
<GAMMA MARK> page
Set MONI GAMMA MARK to ON then set the brightness
and position of the indication.
Setting How to display
MIX The playback picture and camera image are
overlapped. (Default)
WIPE The screen is horizontally or vertically split in
two, and two pictures are displayed
simultaneously.
Item Setting Content
DIRECTION CAM The playback picture is gradually
mixed into the camera image.
(Default)
PB The camera image is gradually
mixed into the playback picture.
MODE Y-MIX The Y signals are mixed. (Default)
WIRE(W) Only the outline components are
mixed and displayed with white
lines.
WIRE(B) Only the outline components are
mixed and displayed with black
lines.
LEVEL 0 to 80% The mix level can be adjusted.
(Default: 80%)
<PB MIX SETTING> U08
MIX TYPE :
B
MIX
MIX
DIRECTION : PB
MODE : Y-MIX
LEVEL : 80%
WIPE
LAYOUT : HOR
PB POSITION : RIGHT
BOUNDARY : 960
Item Setting Content
LAYOUT HOR Horizontally split (Default)
VERT Vertically split
PB
POSITION
RIGHT With HOR, the playback picture
is displayed on the right and the
camera image on the left.
(Default when HOR is selected)
LEFT With HOR, the playback picture
is displayed on the left and the
camera image on the right.
BOTTOM With VERT, the playback picture
is displayed in the lower part
and the camera image in the
upper part. (Default when VERT
is selected)
TOP With VERT, the playback picture
is displayed in the upper part
and the camera image in the
lower part.
BOUNDARY With HOR:
0-1920
With VERT:
0-1080
The boundary position can be
changed. (Default: with HOR:
960, with VERT: 540)
<GAMMA MARK> ESC
MONI GAMMA MARK:
B
ON
MARK LEVEL : 3
H POSITION : 0
V POSITION : 0