Open as PDF
Customizing your camcorder
(Items for customized
See “Using menus” (p. 61) on the operation.
The default settings are marked with .
See page 25.
REC MODE (Recording
See page 25.
You can display the frame and check that
the subject is horizontal or vertical.
The frame is not recorded.
Does not display the guide frame.
Displays the guide frame.
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
The outer frame of [GUIDEFRAME] shows the
display area of a TV which is not compatible
with full pixel display.
You can compensate for camera shake.
STEADYSHOT] to [OFF] ( )
when using a tripod (sold separately), then
the image becomes natural.
Provides a more powerful SteadyShot effect.
Provides the SteadyShot effect under relatively
stable recording conditions.
OFF ( )
The SteadyShot function is not used.
If you change the setting of
STEADYSHOT], the imaging field will also
You can magnify images up to 12 times using
optical zooming, unless [
set to [ACTIVE].
When using a conversion lens (sold
separately), use this function to record
using the optimum compensation for
camera shake and focus for the lens.
Select this when you do not use a conversion
WIDE CONVERSION ( )
Select this when you use a wide-conversion
TELE CONVERSION ( )
Select this when you use a tele-conversion