Open as PDF
The image appears distorted on the 4:3
This happens when viewing an image
recorded in the 16:9 (wide) mode on a 4:3 TV.
Set [TV T
YPE] correctly (p. 81) and play back
Black bands appear at the top and bottom
of the screen of the 4:3 TV.
This happens when viewing an image recorded
in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
Dubbing/Connecting to other
Images are not dubbed correctly.
You cannot dub images using the HDMI cable
The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
put jack of another device (p. 59).
The camcorder is not receiving a GPS
Your camcorder may not be able to receive
radio signals from GPS satellites because of
obstructions. Bring your camcorder to an
open area, and set the GPS switch to ON
again. See page 102 for details on locations or
situations where radio signals may not reach.
The current location on the map of the
camcorder is different from the actual
The margin of error of the radio signal from
GPS satellites is large. The margin of error can
be as wide as several-hundred meters at the
Connecting to a Computer
“PMB” cannot be installed.
Check the computer environment or
installation procedure required to install
“PMB” does not work correctly.
Quit “PMB” and restart your computer.
The camcorder is not recognized by the
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in the correct order.
Examples of functions that cannot
be used simultaneously
The following list shows examples of
unworkable combinations of functions and
Cannot use Because of following settings
[GOLF SHOT], [SMTH SLW
[GOLF SHOT], [SMTH
SLW REC], [
ZOOM], [SPOT MTR/FCS],
[SPOT METER], [SPOT
[SNOW], [WHITE BAL.],
FADER], [ SELF-