Open as PDF
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For the State of California , USA only
Perchlorate Material – special handling may
Perchlorate Material: Lithium battery
The numbers in ( ) are the supplied
ÿ AC Adaptor (1)
ÿ Power cord (Mains lead) (1)
ÿ Component A/V cable (1) Ƀ
ÿ A/V connecting cable (1) Ʉ
ÿ USB cable (1) Ʌ
ÿ Wireless Remote Commander (1)
A button-type lithium battery is already
installed. Remove the insulation sheet before
using the Wireless Remote Commander.
ÿ Rechargeable battery pack NP-FV50 (1)
ÿ CD-ROM “Handycam” Application
Software (1) (p. 37)
“PMB” (software, including “PMB Help”)
“Handycam” Handbook (PDF)
ÿ “Operating Guide” (This manual) (1)
See page 21 for the memory card you can use
with this camcorder.
Using the camcorder
Do not hold the camcorder by the following
parts, and also do not hold the camcorder by
the jack covers.
The camcorder is not dustproofed, dripproofed
or waterproofed. See “Precautions” (p. 66).
Even if the camcorder is turned off, the GPS
function is working as long as the GPS switch
is set to ON. Make sure that the GPS switch is
set to OFF during take off and landing of an
Menu items, LCD panel, and lens
A menu item that is grayed out is not available
under the current recording or playback
The LCD screen is manufactured using
extremely high-precision technology, so over
99.99% of the pixels are operational for effective
use. However, there may be some tiny black
points and/or bright points (white, red, blue,
or green in color) that appear constantly on the