Filter
Top Products
Dubbing/Editing
104
5 Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
6 Select the first 2 digits by turning the
SEL/PUSH EXEC dial, then press the
dial.
7 Repeat step 6 to set up the other digits.
8 Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
9 Press MENU to hide the menu screen.
To cancel the user bits setting
Select [CANCEL] in step 8.
To reset the user bits
Select [RESET] in step 5.
To set the user bits to the real time clock
Select the (TC/UB SET) menu, [UB
TIME REC], then [ON].
b Note
• User-bit values appear at every 3 frames for the tape
recorded in the HDV format.
• When you input HDV format signal via i.LINK
connection, the user-bits are copied, however, they
are not regenerated.
Switching the time value
Press TC/U-BIT.
Each time you press the button, the time value
changes between the time code and user bits.
TC: 00:00:00:00 or 00:00.00:00
U-BIT: 00 00 00 00
b Note
• The time code and user bits cannot be displayed
properly if the tape does not have time code and/or
user bits recordings or if the time code was recorded
using a non-compatible method.
• When you input HDV format signal via i.LINK
connection, the user-bits of the input video are
written on this camera, however, they are not
displayed during dubbing.