Filter
Top Products
Playback
52
Displaying the date/time and
camera settings data – Data code
During playback, you can view the date/time
data and the camera settings data that are
automatically recorded while recording
pictures on a tape.
1 Set the POWER switch to VCR.
2 Press DATA CODE on the camcorder
or Remote Commander during
playback or playback pause.
Each time you press the button, the
indicators appear in turn as follows:
Date/time t Camera settings data t (no
display)
Camera settings data display
In the date/time data display, the date and time
is displayed in the same area.
If you record the picture without setting the
clock, [--- -- ----] and [--:--:--] will appear.
A SteadyShot off
B Exposure
C Aperture value
If you manually adjust the aperture value to
the maximum, appears.
D Gain
E Shutter speed
F White balance
appears when pictures recorded by
using the shot transition function are played
back.
To hide the camera settings data
Select the (OTHERS) menu, [DATA
CODE], then [DATE] (p. 81).
Each time you press DATA CODE, the date/
time indicator turns on and off.
Displaying the video information
– Status check
You can check the setup value of the
following items.
• Audio setup such as audio mix (p. 65)
• Output signal setup ([VCR HDV/DV], etc.)
(p. 71)
• Functions assigned to the ASSIGN buttons
(p. 87)
1 Press STATUS CHECK.
2 Turn the SEL/PUSH EXEC dial to
display the desired item.
Each time you turn the dial, the items
appear in the following order:
AUIDO t OUTPUT t ASSIGN
To turn off the video information
Press STATUS CHECK.
F1.7 1006
dB
00:00:00:00
AUTO
60
min
60
min
HDV1080
i