Filter
Top Products
Playback
Playback
49
Playback
Viewing movies
Make sure you have a recorded cassette
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander.
When you want to play back recordings on
your TV, see page 53.
When playing back the tape, select the
(IN/OUT REC) menu, [VCR HDV/DV],
then [AUTO] (the default setting).
1 Open the LCD panel and adjust the
angle.
2 While pressing the green button, set
the POWER switch to VCR.
3 Press m (rewind) to go to the point
you want to view.
4 Press N (play) to start playback.
To adjust the volume
Adjust the volume by pressing VOLUME
– (decrease) / + (increase).
To stop playback
Press x (stop).
To pause
Press X (pause) during playback.
Press N (play) or X (pause) again to restart the
playback.
Playback stops automatically when the pause
mode continues for more than 3 minutes.
To fast forward or rewind
Press M (fast forward) or m (rewind) in stop
mode.
To review movies on the viewfinder
Close the LCD panel. Then, adjust the
viewfinder angle.
Indicators displayed during tape
playback
A Format of the playback signal
(HDV1080i/ DVCAM/DV SP)
B Remaining battery
C 50i/60i system indicator (p. 83)
D Tape transport indicator
E Time code or user bits
F Recording capacity of the tape
POWER switch
00:00:00:0060
min
60
min
HDV1080
i