Filter
Top Products
Using the Menu
Using the Menu
65
Using the (AUDIO
SET) menu
– INT MIC SET/XLR
SET, etc.
You can select the items listed below on the
AUDIO SET menu. For details on how to select
items, see “Selecting menu items” (p. 58).
The default settings are marked with G. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
AUDIO MONI
You can check the sound from headphones or the camcorder speaker by selecting
either of them.
AUDIO MIX
You can select the sound to be output when playing back a tape on which sounds
were added afterwards (p. 99).
b Note
• You cannot select this item when playing back a tape recorded with [AUDIO MODE] set
to [FS48K].
AUDIO OUTPUT
You can select the audio output level to speakers, etc.
AUDIO SET
RETURN
AUDIO MONI
AUDIO OUTPUT
AUDIO MODE
AUDIO LOCK
AUDIO LIMIT
MI
C NR
MI
C SELECT
[
MENU
]
:END
CH1,CH2
STBY
GCH1,CH2 Select to listen to the CH1 and CH2 sounds separately in the L and R
channels. However, you will hear the CH1 and CH2 sounds mixed
from your camcorder speaker.
CH1 Select to listen to the CH1 sound in channels L and R.
CH2 Select to listen to the CH2 sound in channels L and R.
CH1+CH2 Select to listen to the CH1 and CH2 sounds synthesized in channels L
and R.
GCH1,CH2 Select to output only the originally recorded sound (CH1, CH2).
MIX Select to synthesize and output the originally recorded sound (CH1,
CH2) and the sound added afterwards (CH3, CH4).
CH3,CH4 Select to output only the sound (CH3, CH4) added afterwards.
1Vrms Select to set the audio output level to 1 Vrms/FS.
G2Vrms Select to set the audio output level to 2 Vrms/FS.
,continued