Filter
Top Products
Dubbing/Editing
Dubbing/Editing
99
Dubbing sound to a
recorded tape
You can record additional audio to the
original sound on a tape recorded in the
DVCAM format and the FS32K audio mode.
Preparing for audio dubbing
1 Input audio in one of the following
ways.
• Using the internal microphone (no
connection required).
• Connecting a microphone or an audio
device (optional) to the INPUT1/INPUT2
connectors. (A)
• Connecting an audio device (optional) to
the AUDIO/VIDEO jack. (B)
2 Select the (AUDIO SET) menu,
[MIC SELECT], then [XLR] (p. 66).
To use the internal microphone, select
[INTERNAL MIC].
3 When using the INPUT1/INPUT2
connectors, set the menu items in
accordance with the connector and the
connected device.
To use a microphone
• When the microphone is connected to the
INPUT1 connector, set [INPUT1
LEVEL] to [MIC].
AINPUT1/INPUT2 connectors Microphone (optional)
A/V connecting cable
(supplied)
Internal
microphone
Signal flow
BAUDIO/VIDEO jack
Audio device (such as a
CD/MD player)
Do not connect the
Video plug (yellow).
Audio output jacks
Audio R
(red)
Audio L
(white)
INPUT1/INPUT2
PHANTOM switch
,continued