Filter
Top Products
Recording
40
To connect the cable of the microphone
or audio device
Align the pins of the plug to the INPUT1 or
INPUT2 connectors, and connect them
securely.
Selecting the recording channel
The following settings are required to record
the audio source connected to the INPUT1 or
INPUT2 connector.
1 In the standby mode, press MENU.
2 Select the (AUDIO SET) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
3 Select [MIC SELECT] by turning the
SEL/PUSH EXEC dial, then press the
dial.
4 Select [XLR] by turning the SEL/
PUSH EXEC dial, then press the dial.
5 Select [XLR SET] by turning the SEL/
PUSH EXEC dial, then press the dial.
6 Select [XLR CH SET] by turning the
SEL/PUSH EXEC dial, then press the
dial.
7 Select a channel by turning the SEL/
PUSH EXEC dial, then press the dial.
8 Set [INPUT1 LEVEL] or [INPUT2
LEVEL], and the PHANTOM switch
for each connector.
XLR connector (male)
Connector XLR CH
SET
Recorded
channel
INPUT1 CH1 Channel 1
CH1, CH2 Channel 1
Channel 2
INPUT2 CH1 Channel 2
CH1, CH2 None
Source
Con-
nector
Menu PHAN-
TOM
switch
Micro-
phone
INPUT1 [INPUT1
LEVEL] –
[MIC]
ON
INPUT2 [INPUT2
LEVEL] –
[MIC]
ON