Filter
Top Products
Playback
Playback
53
Playing the picture on
a TV
TV connections differ depending on the type
of TV.
Connect your camcorder to the wall socket
using the supplied connecting cable (DK-
415) and AC Adaptor/charger for the power
supply (p. 14).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 90.
Viewing the picture on a high definition TV
Connect your camcorder and your TV
using either cables described below.
To connect the TV using an i.LINK cable
This connection is recommended when your TV
is compatible with HDV/DV and has an i.LINK
jack.
• Before connecting the i.LINK cable, select the
(IN/OUT REC) menu, [VCR HDV/DV],
then [AUTO] (the default setting).
• In case of this connection, the TV needs to be
set so that it recognizes that the camcorder is
connected. Refer to the operating manual
supplied with the TV for the details.
To connect the TV using the component
video cable
• To view the picture recorded in the HDV
format, set [COMPONENT] on the (IN/
OUT REC) menu according to your TV
(p. 74). When the picture recorded in the
Signal flow
A/V connecting
cable (supplied)
Yellow
White
Red
S video cable
(optional)
TV
Component video cable (supplied)
i.LINK cable (optional)
When you have an S video jack
on your TV or VCR
Red
Blue
Green
,continued