Filter
Top Products
Using the Menu
60
SHOT TRANS
Select this setting to set the transition duration, time, and start timer. See page 41
for details on using the shot transition function.
b Note
• Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by
pressing the button repeatedly (p. 41).
TRANS TIME
Select the time that takes to make a transition from the current setting to the
selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the
default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode.
*1: parameter level
*2: transition of time
START TIMER
LINEAR Select to make the transition linearly.
GSOFT STOP Select to make the transition slowly at the end.
SOFT TRANS Select to make the transition slowly at the
beginning and end, and linearly in between.
GOFF Select to start the shot transition immediately.
5 sec Select to start the shot transition after 5 seconds.
10 sec Select to start the shot transition after 10 seconds.
20 sec Select to start the shot transition after 20 seconds.
*1
*2
*1
*2
*1
*2