Filter
Top Products
Using the Menu
68
INPUT1 LEVEL
Select the input signal from the INPUT1 connector, either from a microphone or
an audio device.
INPUT1 TRIM
You can select the level of input signal from the INPUT1 connector. This setting
is effective only when [INPUT1 LEVEL] is set to [MIC].
-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the
default setting.
INPUT1 WIND
This setting is effective only when [INPUT1 LEVEL] is set to [MIC].
INPUT2 LEVEL
Select the input signal from the INPUT2 connector, either from a microphone or
an audio device.
INPUT2 TRIM
You can select the level of input signal from the INPUT2 connector. This setting
is effective only when [INPUT2 LEVEL] is set to [MIC].
-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the
default setting.
INPUT2 WIND
This setting is effective only when [INPUT2 LEVEL] is set to [MIC].
GMIC Select to input an audio signal from a microphone connected to the
INPUT1 connector. appears on the status check display.
LINE Select to input an audio signal from an audio device connected to the
INPUT1 connector. appears on the status check display.
GOFF Select when you want to record the sound from the INPUT1 connector
as it is, without reducing the noise caused by wind.
ON Select to reduce the noise caused by wind. appears on the status
check display.
GMIC Select to input an audio signal from a microphone connected to the
INPUT2 connector. appears on the status check display.
LINE Select to input an audio signal from an audio device connected to the
INPUT2 connector. appears on the status check display.
GOFF Select when you want to record the sound from the INPUT2 connector
as it is without reducing the noise caused by wind.
ON Select to reduce the noise caused by wind. appears on the status
check display.