Filter
Top Products
Using the Menu
Using the Menu
61
COLOR CORRCT
Select this setting to revise a specific color to be recorded as you desire. See
page 43 for details on using the Color Correction function.
STEADYSHOT
b Note
• The SteadyShot function does not work well when a wide conversion lens other than VCL-
HG0872 (optional) is attached to your camcorder.
• When using VCL-HG0872, select [WIDE CONV.] in [STDYSHOT TYP] below.
STDYSHOT TYP
You can select the type of the SteadyShot function that compensates for camera-
shake. To release the SteadyShot function, select [OFF] in [STEADYSHOT] or
use the ASSIGN button assigned to the SteadyShot function (p. 87).
PEAKING
You can change the outline color and level for peaking.
GON Select to activate the SteadyShot function. You can select the type of
the SteadyShot function in [STDYSHOT TYP].
OFF ( ) Select to deactivate the SteadyShot function. Select when recording
using a tripod. More natural pictures are produced.
You can also deactivate the SteadyShot function by using the
ASSIGN button assigned to the SteadyShot function (p. 87).
HARD Select to activate the SteadyShot function with stronger effect. This
mode is not recommended for recording with camera panning
technique.
GSTANDARD Select to activate the standard SteadyShot function.
SOFT Select to activate the SteadyShot function so that it leaves a slight
unsteadiness on the picture so the picture looks natural.
WIDE CONV. Select when a wide conversion lens (optional) is attached. This mode
is the most effective with Sony VCL-HG0872 wide conversion lens.
COLOR [WHITE], [RED], [YELLOW] are available for the outline color. It is
set to [WHITE] in the default setting.
LEVEL [HIGH], [MIDDLE], [LOW] are available for the outline level. It is
set to [MIDDLE] in the default setting.
,continued