Filter
Top Products
Using the Menu
Using the Menu
83
50i/60i SEL
You can switch the system, 1080/50i (PAL system) or 1080/60i (NTSC system),
used by your camcorder to record. It is set to 50i in the default setting.
1 Select [YES] by turning the SEL/PUSH EXEC dial, then press the dial.
2 Select [YES] again by turning the SEL/PUSH EXEC dial, then press the
dial.
The screen goes off, the system is switched.
z Tip
• You can switch to 60i (NTSC) system also when recording in the DVCAM (DV) format.
00:00:00:00120min
50i /60i SEL
YES
NO
Change to 60i?
Reboots
after change.