Filter
Top Products
Playback
Playback
51
Various playback
functions
You can locate the end of the last recording,
or display the date of recording and camera
settings data.
Searching for the last scene of the
most recent recording
– END SEARCH
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. The END SEARCH function
will not work once you eject the cassette after
you have recorded on the tape.
1 Set the POWER switch to VCR.
2 Press END SEARCH (VCR).
The last scene of the most recent recording
is played back for about 5 seconds.
To cancel the operation
Press END SEARCH (VCR).
b Note
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.
Displaying the screen indicators
You can display the time code and other
information together with the pictures on the
screen.
Press DISPLAY/BATT INFO.
The indicator switches as follows as you press
the button:
(no display) t (display)
When the POWER switch is set to CAMERA,
the indicator switches as follows:
(simple display) t (no display) t (detailed
display)
Simple display
Detailed display
z Tip
• You can display the screen indicators during
playback on a TV. Select the (OTHERS) menu,
[DISP OUTPUT], then [V-OUT/PANEL] (p. 81).
However, only playback mode indicators and tape
counter appear when playing back a tape recorded in
the HDV format, and [COMPONENT] on the
(IN/OUT REC) menu is set to [1080i/576i]*.
* When [50i/60i SEL] is set to 50i. In case of 50i, this
item is [1080i/480i].
STBY
F1.8 1009
dB
120
min
00:00:00:00STBY
CH1
CH2
HDV1080
i
F1.8 1009
dB