Filter
Top Products
Product Features and Accessories
P6330 3.5 GHz Differential Probe Instructi on Manual
3
Features and Standard Accessories
Table 1 shows the features and standard accessories of t he P6330
differential probe.
Table 1: P6330 features and standard accessori es
Feature/Accessory Description
TEKPROBE interface. The TEKPROBE interface supplies
power to the probe, selects the correct display scaling, and
automatically sets the 50 Ω termination on the oscilloscope input.
If your oscilloscope does not have the TEKPROBE interface, you
can use the optional 1103 power supply (refer to page 7).
+
--
Ground
Input connections. The plus and minus connections of the probe
head accept the standard and optional probe accessories (some
of which connect through the square pin adapter).
WARNING: Skin penetration hazard. To prevent injury, install the
probe tip cover when the probe is not in use. The probe tips are
extremely sharp to ensure good contact and measurement
integrity.
Probe tip cover. The probe tips are extremely sharp to ensure
good contact and measurement integrity. When not using the
probe, slide the probe tip cover over the probe head to prevent
damage to the probe tips and to protect yourself from personal
injury.
Tektronix part number: 200-4236-00
Three-inch ground lead (2 ea). Use the ground lead for
connecting the probe ground to the circuit, if needed. The
socketed end of the lead may be connected to accessories, or
fitted onto 0.025-inch pins.
Tektronix part number: 196-3469-00 (package of 2)