Filter
Top Products
Product Features and Accessories
8
P6330 3.5 GHz Differential Probe Instruction Manual
Table 2: Optional accessories (Cont.)
Accessory Description
50 Ω termination. Terminates the output of the 1103 power
supply to the required 50 Ω if the oscilloscope does not have a
50 Ω input setting. Order Tektronix part number 011-0049-01.
50 Ω BNC cable. Connects to the 1103 output.
Order Tektronix part number: 012-0076-00
IEEE1394 Adapter. The IEEE1394 Adapter allows you to probe
signals on the bus, external to system enclosures, without
disturbing system operation. The adapter maintains a balanced
55 Ω signal path and can be used in both single-ended and
differential modes.
Order Tektronix part number: 679-5027-00
Micro KlipChip adapters (2 ea). Use the adapters to probe the
leads on integrated circuits that are surface-mounted. The
0.025-inch pin at the back of the adapter may be connected to the
X- and Y-lead adapters, and the 3-inch ground leads.
Order Tektronix part number: SMK4 (package of 4)