Filter
Top Products
Maintenance
56
P6330 3.5 GHz Differential Probe Instruction Manual
Removing and Replacing the TEKPROBE Interface Collar
To remove the TEKPROBE interface collar, firmly grasp the
compensation box body with one hand and the TEKPROBE interface
collar with the other hand. Firmly pull the interface collar off.
To replace the collar, first note the pin configuration on the
compensation box and their holes in the interface collar. The group
of three pins fit through the smaller of the two holes in the interface
collar. See Figure 29.
Align the tab to the slot, and gently press the two pieces together.
See Figure 29.
Once installed, the TEKPROBE collar should rotate freely to lock
and unlock.
Tab
Slot
Figure 29: Replacing the TEKPROBE interface collar