Filter
Top Products
22
Alarm Recording Mode
Set your camera to trigger Intensive Recording via Motion detection, Sensor Alarms, or user-instigated Instant Alarm.
1. On the Display screen, click Setup.
2. Click Motion Detection, and then click the Etc. tab.
3. Select your desired camera channel from the Select Channel list.
4. Select Enable Motion Detection on Continuous Recording.
5. On the Configuration menu tree, click IP Cameras.
6. Click the Camera Setup tab.
7. Click the Advanced Camera Setup tab.
8. Select the camera you want to record audio from in the Network Cameras Currently in Use field.
9. Select your desired Intensive Recording Mode (Accelerate on Motion Alarm, Accelerate on Sensor Alarm, or Accelerate
on User Input (Instant) Alarm).
10. Click Apply to save your settings.
Note When using H.264 codec, your recorder will capture iFrames at a normal recording rate, and increase to full frames for Intensive
Recording.