Filter
Top Products
68
ADVANCED PTZ SETUP
The General tab in PTZ Setup allows you to reverse PTZ direction function if necessary, enable the use of Onscreen Compass for PTZ
control, set the speed for your camera, and set the camera ID.
PTZ Address Settings
Some protocols support software address settings.
The RX-Addresses and ID settings are compatible with a particular line of receivers that support 2 ID addresses.
The PT Driver Address is associated with the PTZ ID address set on the camera. The addresses must match for the recorder
to communicate with the proper PTZ camera. This is especially important when a large number of PTZ cameras are connected
to the recorder.
Note To select a PT Driver Address of 129-256, manually enter the ID in the box.
Adjust Speed Settings
Reverse PTZ controls
PTZ status when closing PTZ
controls on recorder
Enable Onscreen Compass
PTZ Address Settings