Filter
Top Products
32338AC 29
GENERAL SETUP
To access the General Setup window, click Setup in the Live screen, and then click General Setup.
Audio
The Audio tab allows you to configure audio channels, audio playback, and set a voice warning.
Configure Audio Channels
System Volume
1. Click Volume to adjust the volume of your system.
2. Use the slider, enter a value, or click Mute to disable audio playback.
3. Click OK.
Voice Warning
The recorder allows users to play a sound file when either a Motion event or Sensor event occurs. This file can be a custom created
sound file that is unique to the application. The selected WAV file is played through speakers attached to the recorder.
1. Click Browse, and then locate your .wav file.
2. Click Play to test the file.
3. Select Activate on Motion or Activate on Sensor Alarm to activate this warning whenever that event occurs.
4. Click Apply to save your settings.
Audio Channels
1. Select an Audio Channel.
2. Select Record and Use Live Audio, as desired.
3. Adjust the gain and Live Volume for each channel, depending on your desired output and microphone sensitivity.
4. Click Apply to save your settings.
Select an audio
for use with
alarm or sensor
event
Adjust Volume