Filter
Top Products
44
STORAGE MANAGEMENT
Status Check / Email
Use the Status Check/Email tab in Storage Management to configure settings for status checks and email recipients when status checks
require attention. This function can keep you apprised of events detected by your system without requiring you to check check the
recorder each day.
General
1. On the Display screen, click Setup.
2. Click Storage Management.
3. Click the Status Check/Email tab.
4. Click the General tab.
5. Select Enable Email Alarm.
6. Enter a From Name and email Address.
Note This name and address will appear in the From line of email alert messages.
7. Enter the SMTP information for the email account that will be used to send
emails from the recorder. Contact your administrator for this information if
necessary.
8. If using a secondary email account select Use Secondary SMTP and
complete the SMTP information.
9. Click Test to send a test message to either address.
10. Click Apply to save your settings.
Users
1. On the Display screen, click Setup.
2. Click Storage Management.
3. Click the Status Check/Email tab.
4. Click the Users tab.
5. Select the type of Event to send email on.
6. Enter the User and E-mail Address of a desired recipient.
7. Click Add.
8. Repeat for additional recipients and types of events.
Note A separate email notification for each type of event must be set up for a single
recipient to receive notifications for each type of event.
9. Click Apply to save your settings.