Filter
Top Products
36
Setting Nighttime Continuous Recording
1. In the Schedule Number list, select Sch02.
2. On the Sch02 row, click and drag your mouse to select the hours 0 – 8, and then click Set.
3. Click 1 in the Camera section repeatedly, until a red C (continuous) appears.
4. Repeat for 2 – 4 in the Camera section.
5. Click Apply to save.
Setting Weekend Motion Recording
1. In the Schedule Number list, select Sch03.
2. Clear Mon-Fri, and then select Sun and Sat.
3. On the Sch03 row, click and drag your mouse to select the entire row, and then click Set.
4. Click 1 in the Camera section repeatedly, until a green M (motion) appears.
5. Repeat for 2 – 4 in the Camera section.
6. Click Apply to save.