Filter
Top Products
- 116 -
5. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. Camera Name)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your
Camera.
LAN Server: The local IP address of your Camera.
Click Add to add the application.
* Please refer to your router’s user’s manual for detail Virtual
Server setting. Some router might use Port Forwarding or
Special applications for this function. The setup steps should
be very similar.
6. Open another web browser and enter your DDNS domain and
camera’s port number.
http://yourDomainName:PortNumber
7. The camera login page will appear.