Filter
Top Products
- 36 -
Static IP: Select this option to assign the IP address for the
camera directly. You can use IPFinder to obtain the related
setting values.
IP
Enter the IP address of the camera. The default
setting is 192.168.10.30.
Subnet Mask
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Default
Gateway
Enter the Default Gateway of the camera. The
default setting is 192.168.10.1.
Primary/
Secondary DNS
DNS (Domain Name System) translates domain
names into IP addresses. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
PPPoE: Select this option when you use a direct connection via
the ADSL modem. You should have a PPPoE account from your
Internet service provider. Enter the User Name and Password.
The camera will get an IP address from the ISP as starting up.
NOTE Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when you
select PPPoE as your connecting type, you have to set up the email or
DDNS configuration in advance.
DDNS Setting: With the Dynamic DNS feature, you can assign a
fixed host and domain name to a dynamic Internet IP address. To
set up the DDNS:
1. Select the Enable option to enable this feature.
2. Select the Provider from the pull-down list.
3. Enter the required information in the Host Name, User
Name, and Password boxes.
NOTE You have to sign up for DDNS service with the service provider before
configuring this feature. Please refer to Chapter 6 for detail
information.
UPnP: The camera supports UPnP (Universal Plug and Play), which
is a set of computer network protocols that enable the device-to-