Filter
Top Products
- 39 -
4.4.3 Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the
users within a certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the
Accept option to assign the range of IP addresses that are allowed to
access the camera, or select the Deny option to assign the range of IP
addresses that are blocked to access the camera.
Disable: Select this option to disable the IP Filter function of the
camera.
Accept
IPv4: Assign a range of IP addresses that are allowed to access
the camera by entering the Start IP address and End IP address
options. When you are finished, click Add to save the range
setting. You can repeat the action to assign multiple ranges for
the camera.
For example, when you enter 192.168.10.50 in Start IP Address
and 192.168.10.80 in End IP Address, the user whose IP address