Filter
Top Products
- 21 -
- Camera Display Area: It shows the connected camera(s) within the
same network. By default, the IP setting on the Camera is set up
DHCP. If you have DHCP server, the camera will automatic get the IP
address from DHCP server. If you do not have DHCP server on your
network, it will show the default IP as 192.168.10.30.
Double click the IP address; it will link to Camera’s Web
Configuration page.
- Change IP: Click this button to bring up the following window. It
allows you to change the IP Address. You can select either Static IP
or click DHCP. Then, enter the Administrator ID & password. By
default ID/password is: admin. When complete, click “Change”.
- Search: Click this button to search the connected camera
within the network.
- Exit: Click this button to exit the program.