Filter
Top Products
- 57 -
4.7 Motion Detect
The Motion Detect menu contains the command and option that allow
you to enable and set up the motion detection feature of the camera.
The camera provides three detecting areas.
To enable the detecting area, select Window 1/2/3 from the pull-down
list, and then select Enable. When the detecting area is enabled, you can
use the mouse to move the detecting area and change the area coverage.
Name: Assign a name to the detecting area.
Threshold: Move the slide bar to adjust the level for detecting
motion to record video.
NOTE Sliding the Threshold bar to the right will decrease the sensitivity of
motion detection; sliding the Threshold bar to the left will increase
the sensitivity of motion detection.