Filter
Top Products
- 63 -
4.8.5 Event Configuration >> GPIO Trigger
GPIO Trigger: Select the Enable Trigger In 1/2 option to enable
the GPIO trigger function of the camera, so that you can set
Trigger Out function or send captured images within the detecting
area to the SD card, FTP server, email receiver, Network Storage
server, or send an instant message. Event server has to be
configured prior to using the functions.
Schedule Profile: Select a schedule profile from the pull-down
list.
Action: Set the Trigger Out function or select the destination
that the captured images will be sent to: Record to SD Card,
Record to Network Storage, Send Email, FTP Upload, or Instant
Message.