Filter
Top Products
- 61 -
4.8.3 Event Configuration >> Motion Detect Trigger
Motion Detect Trigger: Select the Enable option to enable the
trigger function of the camera, so that you can send captured
images within the detecting area to the FTP server, email receiver,
or the Network Storage server. You have to configure
corresponding settings, such as FTP server and email server, to
enable this feature. Please note that you have to configure the
related settings before enabling these features.
Schedule Profile: Select a schedule profile from the pull-down
list.
Action: Set the Trigger Out function or select the destination
that the captured images will be sent to: , or Record to SD Card,
Record to Network Storage, Send Email, FTP Upload, or Instant
Message.