Filter
Top Products
44 © 2008 VBrick Systems, Inc.
Controlling a VBStar
A VBStar is an MPEG-2 appliance which can record incoming streams for store and forward
use on an included 60 GB hard drive. The following functions are available using the
handheld IR Remote Control when you have an MPEG-2 VBStar with a decoder:
• Reset – Press twice within five seconds to reset the VBrick. The
appliance will reboot.
• Encoder Off/On – Turns the encoder off for privacy.
• Slot1, Slot2 – Selects which slot is to be controlled via the
remote. This is relevant for dual encoder and dual decoder
models only.
• PIP – Turns PIP Off/On. This is relevant for encoder/decoder
models only.
• Local Edit – Used for Front Panel Edit.
• Camera – Used for Camera control, when applicable. Not
supported in current release.
• Hard Drive – Displays the "Play" guide.
• Billboard – Displays the Billboard.
• Con Guide – Displays the Conference Guide.
• Pro Guide – Displays the Program Guide.
• Up – Function Dependent.
• Down – Function Dependent.
• Left – Function Dependent.
• Right – Function Dependent.
• Select – Function Dependent.
• Zoom In / Prev Page – Function Dependent.
• Zoom Out / Next Page – Function Dependent.
• <<, n , > ||,>> – Rewind, fast Forward, etc.
• Record – Starts recording to the hard drive. Screen indication is
a red record icon.
• Send – Initiates an FTP transfer to a pre-configured
destination.
• Conference
• Previous – Toggle to previous call.
• Ans Call – Answer a call.
• Rej Call – Reject a call.
• Ring RMT – Ring the remote.
• Ring DIS – Disable local ringer.
• Ring ENB – Enable local ringer.
• Hang Up – Disconnect a conference.
• Aux 1 – 4 Unused.