Filter
Top Products
VB6000 Reference
VBrick Appliance Getting Started Guide 73
Example 2
Connect the +12V Power Output of the VBrick through a switch to the event pin on the
COM1 port.
Example 3
Connect COM1 output pin (pin1 RTS or pin2 DTR) through a switch to a COM1 event pin.
For this method to work, you must force the desired output pin (RTS or DTR) to On via
IWS:
T To force the desired output pin to On:
1. Go to the
Configuration: Passthrough page in IWS.
2. Change COM1
Passthrough State to Responder and click Apply.
3. Change
RTS/DTR Control to Force On and click Apply.
4. Change COM1
Passthrough State to Disabled and click Apply.
5. Click
Save Config when done.