Filter
Top Products
66 © 2008 VBrick Systems, Inc.
and Surveillance, and Monitoring appliance, see "VBSSM" in the VBrick MPEG-2 Appliance
Admin Guide.
Figure 9. Model 9174-4200-xxxx VBSSM – Rear View
VB6000 Expanded VBSSM
Figure 10. Model 9172-4400-0023 Expanded VBSSM – Rear View
Expanded VBSSM Activity LED
On the Expanded VBSSM, the Activity LED has expanded functionality. The Activity LED
on this model is used to indicate the status of four different ports on the appliance including:
COM1, COM2, Video In, and Ethernet. The graphic label located at the bottom right of the
unit explains the color-coded sequence used to monitor activity on these ports. As explained
below, the
Activity LED will cycle through the following color sequence at one second
intervals.
Table 15. Expanded VBSSM Activity LED Color Codes (left to right)
Sequence Color Description
1
Green
Blinking. Indicates cycle start (two seconds).
2
Green
Solid. Indicates Ethernet activity (otherwise the LED is off).
3
Amber
Solid. Indicates COM1 Tx activity (otherwise the LED is off).
4
Amber
Solid. Indicates COM1 Rx activity (otherwise the LED is off).
5
Amber
Solid. Indicates COM2 Tx activity (otherwise the LED is off).
6
Amber
Solid. Indicates COM2 Rx activity (otherwise LED is off).