Filter
Top Products
Setting System Options User Guide
74
Note: If you are not subscribed for WiLife Platinum, the Access Control section is grayed out. Thus, the “Exit
Command Center” function is the only one available under the non-Platinum running Command Center, which
requires a password --if a password is set-- to exit Command Center.
Similarly, if you are running WiLife Platinum, but no password is set, the Access Control section is also grayed
out.
You can change your password, or edit any of the Access Control options, or both, by clicking “Accept
Changes.”
Check for Software Updates
Setup > Advance > Application Updates section > CHECK FOR UPDATES button.
Command Center will compare the software and firmware version dates recorded on your PC with the latest
versions available online. If your PC shows an older date for either one or both of them, Command Center will
offer to download and install the latest version using the Software Manager Wizard.
To check and download new Command Center updates:
Go to the Setup > Advanced tab and click the Update Camera button. The Software Manager Wizard opens
and checks for newer versions of the software.
If the Software Manager finds a newer version, you will be prompted to download and install the update. Click
Next > to continue with the install. To complete the update, simply follow the downloading instructions for the
Software Manager and then the install instructions for the WiLife Install Wizard.
Note: If you have Command Center running, you may be asked to shut it down before starting the installation
process.
Update Camera Firmware
Setup > Advance > Application Updates section > UPDATE CAMERA button.
This feature updates the selected camera with the most recent firmware version currently downloaded to your
PC's hard disk. Firmware versions are typically downloaded as part of an overall software update (see Check
for Software Updates topic). Command Center automatically keeps track of which camera firmware is
appropriate for different camera types such as the Indoor and Outdoor Cameras.
To download new firmware updates:
1) Go to the Setup > Advanced tab screen and click the Update Camera button. The Update Camera
Firmware screen displays.