Filter
Top Products
24 CHAPTER 2: INSTALLING 3COM NETWORK ACCESS MANAGER
Installing 3Com
Network Access
Manager
Follow the instructions in this section to install 3Com Network Access
Manager.
Overview 3Com Network Access Manager comprises five components:
■ Internet Authentication Server component consisting of
authorization/authentication DLLs,
■ Active Directory Server component, this component will make
changes to your Active Directory schema configuration which cannot
be deleted from AD,
■ Network Administrator User Interface,
■ Network Operator User Interface,
■ this user guide.
Each component is installed through the 3Com Network Access Manager
installer.
You will need to have Schema Administrator privileges to install the
Active Directory component.
New Installation The Internet Authentication Server component needs to be installed on
each IAS in the network. However, the Active Directory Server component
should only be installed on one Active Directory server (also known as a
domain controller) which should be the schema master on your network.
The changes that the Active Directory Server component makes to the
Active Directory server will be replicated across all of the Active Directory
servers on your network.
CAUTION: The changes that the Active Directory Server component
makes to the Active Directory schema configuration cannot be deleted.
The 3Com Network Access Manager uninstaller will not affect or remove
these Active Directory changes.
Install the Network Administrator User Interface and Network Operator
User Interface on the PCs that will be used by the network administrators
and operators using 3Com Network Access Manager. Before installing,
check that the operating system and configuration of the PC complies
with Table 5 and Table 6.