Filter
Top Products
30 CHAPTER 2: INSTALLING 3COM NETWORK ACCESS MANAGER
Figure 9 Installation Complete
With the exception of installing the Active Directory component, any
problems encountered during installation will result in an error message
being displayed and the installation aborted. You will need to manually
fix the problem before restarting the installation.
If the installer encounters problems during installation of the Active
Directory component, a
warnings.txt file will be created and the Wizard
Complete dialog will shows its location.
11 Repeat steps 1 to 8 for any other PC being used for RADIUS,
Administrator or Operator users.
Modifying and
Repairing An
Installation
To change the 3Com Network Access Manager components installed on
a PC or repair an existing installation, follow these steps:
1 Insert the 3Com Network Access Manager CD in the PC’s CDROM drive.
If Autorun is enabled on the PC, the installation starts automatically and
you can skip steps 2 and 3.
2 From the Start menu, select Run.
3 Type
D:\setup (substitute the appropriate letter of your CD-ROM drive
for D), and click OK.