Filter
Top Products
MIC400 Series Camera | Installation and Operation Manual AAAEN | 10
Bosch Security Systems Issue 1
Installation Environment
The MIC400 range has been designed to be easily installed on a variety of
common fittings. Most commonly a dedicated CCTV camera pole is used, the
MIC400 will bolt directly to the top of most poles using the industry standard 4”
(101.6mm) fitting. Such camera poles provide robust mounting platforms that
minimize camera motion and typically have large base cabinets to mount all
ancillary equipment such as power supplies.
The MIC400 cameras can also be mounted on lamp post columns using the Pole
Mount Bracket (MIC-PMB) however users should be aware that lamp posts can
often be subject to movement and are not suitable platforms in all conditions or for
all applications.
For mounting directly onto buildings Bosch Security Systems manufacture a range
of brackets suitable for all typical building installations for upright (90°), canted
(45°) or Inverted camera positions, examples are shown below.
CAUTION: Ensure all local safety codes are observed when
installing this product; ensure a strong safety chain is used to
secure the MIC400 camera to prevent any danger of dropping
the product during installation. Particular care should be taken
with Stainless Steel models due to the additional weight.