MIC400 Series Camera | Installation and Operation Manual AAAEN | 56
Bosch Security Systems Issue 1
Drive unit Integral pan/tilt motor drive
Pan angle 360° continuous rotation
Pan speed Up to 90° per second (variable)
Tilt angle 320°
Tilt speed 0.2° to 90° per second (variable)
Speed control Closed loop electronics
Preset accuracy Better than 0.08°
Proportional P/T to zoom Yes
PHYSICAL
Construction material 6mm thick aluminum
Viewing window Tempered flat glass
Standard colours Black (RAL9005), Grey (RAL7001) or White
(RAL9003)
Standard finish Powder coated
Dimensions 205(W) x 360(H) x 165(D) mm (upright &
inverted)
Weight 5.5Kg (including 4" PCD base)
ENVIRONMENTAL
Operational temperature -20°C to +50°C, (-30° with optional heater)
Weather proofing NEMA 4x / IP68
ELECTRICAL
Input voltage 15V AC / 18V DC
Power consumption 25.2W max
AVAILABLE OPTIONS
Configurations available Upright mount, inverted mount or upright canted
at 45° mount options
Colour/Finish Bespoke colours and finishes available on
request
Camera module 18x camera module or 36x camera module
Camera colour system NTSC or PAL
Installed protocol Choose from current protocol list
Telemetry control card Built-in
Window wiper Optional, factory fit
Washer Optional, (bracket and nozzle supplied only)
Washer pump drive card Optional, fitted in PSU
Heater Optional, factory fit
Privacy board Optional, factory fit
Alarm card Optional, fitted in PSU
Speakers Optional, factory fit
IR lamps Optional, factory fit, specify upright or inverted
camera operation (uses special PSU)
ACCESSORIES
Power supply Choose from 115V AC, 230V AC, 24V AC or 12V
DC versions
Mounting hardware Compatible with all MIC series bracketry
Cabling Optional. Choose from 2M, 10M, 20M or 25M
versions