Filter
Top Products
MIC400 Series Camera | Installation and Operation Manual AAAEN | 43
Bosch Security Systems Issue 1
Whatever caption is being set the writing must be entered into the Caption Text
Box. The caption will be displayed in block capitals and only certain extra
characters are recognised. Unknown characters will be displayed as "?".
Location and Colour
These options define where on the video and in what colour the caption will be.
Set Default Caption
This programs the current caption (if valid), position and colour settings to the
default caption. If captions are turned on this should appear immediately on the
video.
Toggle Captions On / Off
This setting is a global On / Off setting for captions. If Off then no captions will be
displayed, Default, Preset or Sector.
Toggle Sector / Preset
This toggles between the 2 caption modes of Preset or Sector. These options are
mutually exclusive.
Preset Captions
This section provides 3 options, to either set one preset caption to the preset
number specified in the input box. Set all 64 presets to the same caption, or clear
all 64 preset captions to nothing.
Sector Captions
This section allows the definition of the sectors and what caption to use for each.
First the Caption Number is entered which corresponds to a preset caption, then
the start and end of the group in terms of an individual sector. Press Set Sector
Info to store the data.
Thermal
The Thermal tab controls the function of the FLIR thermal imager in the MIC412
only; this screen has no function with a MIC400 Camera.