Bosch Appliances MIC400AL Security Camera User Manual


 
MIC400 Series Camera | Installation and Operation Manual AAAEN | 52
Bosch Security Systems Issue 1
If only a few commands are utilised on the list then the rest should be set to "End"
which will display "N/A" in the option column.
Below is a list of the available SonySet Commands and their corresponding Values
or valid value ranges:
Table R – Sonyset Commands
Command Value
Camera Power On / Off
Zoom Set 0 to 28672
Digital Zoom On / Off
Focus Set 4096 to 49152
Focus Mode Auto / Manual
Focus Control One Push Trigger / Force Infinity
AF Sensitivity High / Low
Focus Near Limit 4096 to 49152
White Balance Mode
Auto / Indoor / Outdoor / One Push /
Auto Tracing / Manual
White Balance Control One Push Trigger
Red Gain Control Reset / Plus 1 / Minus 1
Red Gain Set 0 to 255
Blue Gain Control Reset / Plus 1 / Minus 1
Blue Gain Set 0 to 255
Exposure Mode
Auto / Manual / Shutter Priority / Iris
Priority / Gain Priority / Bright / Shutter
Auto / Iris Auto / Gain Auto
Slow Shutter Mode Auto / Manual
Shutter Control Reset / Plus 1 / Minus 1
Shutter Set 0 to 19
Iris Control Reset / Plus 1 / Minus 1
Iris Set 0 to 19
Gain Control Reset / Plus 1 / Minus 1
Gain Set 0 to 19
Bright Control Reset / Plus 1 / Minus 1
Bright Set 0 to 19
Exposure Comp Control Reset / Plus 1 / Minus 1
Exposure Comp Set 0 to 14
Exposure Comp Mode On / Off
Backlight On / Off
Aperature Control Reset / Plus 1 / Minus 1
Aperature Set 0 to 19
Low Lux On / Off
Hi Resolution On / Off
Image Flip Horiz On / Off
Freeze Frame Off / Negative / Black & White
On Screen Data On / Off
Caption Display On / Off
Auto IR On / Off
Camera Initialise Lens Recal / Bad Pixel Correction
Image Flip On / Off
End N/A
Invalid N/A