Filter
Top Products
MIC400 Series Camera | Installation and Operation Manual AAAEN | 7
Bosch Security Systems Issue 1
MIC400 Camera Versions and Options
MIC400 Camera Versions
This manual covers the installation & operation of the following MIC400 series PTZ
cameras, briefly described below:-
MIC400AL The MIC400AL is made from machined and cast aluminium and is
then pre-treated and painted with two part epoxy power coat paint in either
RAL7001 (Grey) or RAL9005 (Jet Black). This is the basic MIC model and is
available with optional wipers, heaters, 8-input alarm card and washer pump kit.
MIC400IR This is the MIC400AL camera fitted with powerful twin IR lamps
that illuminate to 55M. Available options include the wiper and washer pump kit.
The MIC-IR power supplies feature a built in washer pump drive function and 4
alarm inputs as standard, heaters cannot be fitted to the MIC400IR.
MIC400PA The MIC400AL camera is fitted with twin PA speakers that can be
used for public address applications. Available options include the wiper, 8-input
alarm card and washer pump kit; heaters cannot be fitted to the MIC400PA.
MIC400UL The MIC400UL is fitted with special seals to allow continual
submersion in water to a depth of 30m. Available options include heaters and the 8
input alarm card. A wiper cannot be fitted to the MIC400UL.
MIC400ST The MIC400 is also available in machined 316 Stainless Steel for
additional strength and corrosion resistance. Available options include a wiper,
heaters, 8 input alarm card and washer pump kit.
MIC400UT The MIC400UT is fitted with special seals to allow continual
submersion in water to a depth of 25m with enhanced corrosion resistance.
Available options include heaters and the 8 input alarm card. A wiper cannot be
fitted to the MIC400UT.
MIC400 Power Supply Unit Versions and Options
BOSCH Group has designed a range of power supplies for the MIC400 cameras to
cater for a variety of common voltages and provide all the connections needed for
power, telemetry and video. The power supply units and options are detailed
below.
For cameras without IR lamps only:-
MIC-240PSU 240Vac input Power Supply Unit
MIC-115PSU 115Vac input Power Supply Unit
MIC-24PSU 24Vac Input Power Supply Unit
MIC-12PSU 12Vdc Input Power Supply Unit for vehicle installation
For MIC400IR cameras only:-
MIC-IR-240PSU 240Vac input Power Supply Unit
MIC-IR-115PSU 115Vac input Power Supply Unit
MIC-IR-12PSU 12Vdc input Power Supply Unit for vehicle installation
CAUTION: Do not use IR power supplies with non IR cameras,
or damage to the MIC400 unit will occur.