Bosch Appliances MIC400AL Security Camera User Manual


 
MIC400 Series Camera | Installation and Operation Manual AAAEN | 55
Bosch Security Systems Issue 1
CHAPTER 5 Technical Specifications
MIC400AL
CAMERA MODULE
Image sensor 1/4" EXview CCD
Picture elements 380K NTSC / 440K PAL (WIDE)
Horizontal resolution 470TVL NTSC / 460TVL PAL (WIDE)
Filter Automatic mechanical IR cut filter
Focus system Auto or manual Iris Auto or manual with slow shutter integ
r
Synchronisation Internal / External (V-Lock)
Recommended illumination 100 to 100,000 lx
Signal/Noise ratio 50dB or more
Back Light Compensation (BLC) On/Off
White balance Automatic
Automatic Gain Control (AGC) -3 to -28 dB, 2dB steps
Aperture control 16 Steps
18x optical zoom module
Lens F=4.1mm (WIDE) to 73.8mm (TELE), F1.4 to
F3.0
Zoom 18x optical (12x digital)
Angle of view 48º (WIDE end) to 2.8º (TELE end)
Minimum illumination 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL), 0.11 lux
(F1.4, 1/4s NTSC, 1/3s PAL), 0.01 lux or less
(F1.4, 1/4s NTSC, 1/3s PAL, ICR ON)
Shutter speed 1/1 to 1/10,000s (22 steps) NTSC, PAL
36x optical zoom module
Lens F=3.4mm (WIDE) to 122.4mm (TELE), F1.6 to
F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8º (WIDE end) to 1.7º (TELE end)
Minimum illumination 1.4 lux (1/60s NTSC, 1/50s PAL), 0.1 lux (1/4s
NTSC, 1/3s PAL), 0.01 lux or less (1/4s NTSC,
1/3s PAL, ICR ON)
Shutter speed 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to
1/10,000s (20 steps) PAL
OPERATIONAL*
Auto flip Yes
Manual flip Yes
Dynamic privacy zones 3D privacy masking with infinite zones (using
optional
privacy card)
Presets 64 telemetry presets utilising resolver technology
(using FV protocol, 10 camera set-up presets to
allow ANPR, colour correction etc.)
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 presets
Home position Yes (preset 1 or tour)
COMMUNICATION & PROTOCOLS
Communication RS485 / RS422
Control protocol Refer to current supported protocol list
CONNECTIVITY
Video Co-axial via composite cable
Telemetry Twisted pair. Simplex, half and full duplex
operation via composite cable
Power Via composite cable
ALARMS
Alarm inputs 1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication Tamper switch (ground connection)
MECHANICAL