Filter
Top Products
MIC400 Series Camera | Installation and Operation Manual AAAEN | 40
Bosch Security Systems Issue 1
The re-arm time is a time in seconds before the MIC returns to its current position
and returns the relay to its prior state. The options for this are 1, 5, 10 or 60
seconds. To send the settings to the MIC select the desired options and then press
Set Relays.
Lens Recalibration and Frame Integration
This section defines when and how often the Sony Optical Camera block should
perform a recalibration process. The first field Inactivity defines how long in hours it
should be after the last manual control command before the first recalibration
should take place, and the second is a time in days between each successive
recalibration from then on.
To set these enter the appropriate values in the text boxes provided and press
Apply. Alternatively the Recall Now button will perform a manual recalibration.
Frame Integration Settings
This section defines the Max Gain and Min Shutter Speed parameters used by the
MIC when in Auto Lowlight mode. The drop down lists provides the actual settings
available in dB for gain and FPS for shutter speed. The On Screen Data auxiliary
command will indicate the current frame rate if required. The values are set by
simply selecting the desired option from the drop down lists.
Privacy and Captions
The Privacy and Captions tab allows the user to define and set the privacy mask
function if the optional privacy card is fitted; this is not applicable to the MIC400 as
the privacy card cannot be used with the thermal imager.