Filter
Top Products
Pressing _ willnot start Setthe camcorder to _; mode. 35
recording. Load arecommended disc.
The disc isfull (" _, END" appears on the screen). Delete some recordings 43
(DVD-RW in HD quality, or SDquality (VRmode)) to free some space or
replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
Remove the disc protection. 66
Unfinalize the disc (DVD-RW inHD quality, or SDquality (VIDEOmode)). 71
Even after stopping recording, the The scene is being recorded on the disc. This is not a malfunction. 35
DISCaccess indicator does not go off,
The point where _ was There isa slight interval between pressing _ and the actual start
pressed doesnot match the of recording on the disc. This is not a malfunction.
beginning/end of the recording.
The recording suddenly stops shortly The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the 111
after starting recording, problem persists replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
Camcorder will not focus. Autofocus does notwork on the subject. Focus manually. 59
Adjust the viewfinder with the dioptric adjustment lever. 36
Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use 113
tissue paper to clean the lens.
Sound isdistorted. When recording near loud sounds (such as fireworks or concerts), sound
may become distorted. This isnot a malfunction.
Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 36
Playback/Editing
Pressing the playback button does Load adisc. 32
not start playback. Set the camcorder to _ mode. 41
Donot insert into the camcorder discs that were initialized, recorded or
edited using another DVD device.
If using a single-sided disc, check that the disc is inserted with the label 32
side facing up,
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
• During playback there isvideo The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 111
noise and the sound is distorted.
Donot insert into the camcorder discs that were initialized, recorded or
• The disc cannot be read.
edited using another DVD device.
103