Canon HR10 Camcorder User Manual


 
}: _'sOOS
IMPORTANT
Avoid the following actions while tile
card access display (11_Q ) appears on
screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover and do not remove the memory
card.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
',_,/_ switch or the operating mode.
The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
_%. SLIDESHOW
FUN& _uNc ÷/"_"X÷
( CS 27) @) 0 \yt
1 Press _.
2 Select (,iV) [_> SLIDESHOW] and
press (Q).
3 Select (4_) [START] and press
Images are played back one after
another.
Press @ to stop the slideshow.
Index Screen
1 Move the zoom lever toward W.
The still images index screen
appears.
2 Select (AV, _ll_) an image.
Move the green selection frame to
the image you want to view.
If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the
zoom lever toward W to extend the
green selection frame to the whole
page, and move (_) between
index pages. Move the zoom lever
toward T to return to moving
between single images.
3 Press ((_).
The index screen closes and the
selected image is displayed.
Magnifying Photos during Playback
During playback, still images carl be
magnified up to 5 times.
I
W-T
1 Move the zoom lever toward 1".
The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
76